Pack made up of 5 square recessed downlights. Lamp holder for GU10 light bulb included. Available with two years warranty. Tilting angle of 30 degrees and turning of 351 degrees that will allow you to direct the lighting to where you need it. Ideal for lighting homes or businesses.
Dimensions: Height 2.5 cm. Diameter 9 cm.
Warning: Last items in stock!
- Brand: Wonderlamp.shop.
- Includes GU10 Lampholder (direct to 220v).
- IP: 20.
- Tilting angle: 30º
- Turning angle: 351º.
- Drill: Ø80 mm (embed celing hole)
- Material: aluminium.
- 2 years warranty.
- Bulb not included
TRANSFORMER IS NOT NECESSARY!
1.- Between the lamp and unlighted surfaces or objects should not be less than 0.5 m.
2.- Between recessed light fixtures not less than 0.5 m.
3.- Between the highest part of the embeddable and the ceiling not less than 2.5 cm.
4.- Between the vertical walls (inside the ceiling) and the recessed light fixture body once installed should not be less than 7.5 cm.
5.- Check the correct placement of the bulb in the lamp holder.
Ceiling installation. Before starting any assembly or installation, make sure you have disconnected the electric current.
1.- Make a hole in the ceiling that ensures a minimum gap and that does not coincide with beams, pipes or electric cables (see embedding hole dimensions). Connect the GU10 lamp holder to the electrical current. Insert the recess light fixture into the ceiling and take the lamp holder out through the hole of the downlight.
2.- Ground connection is not necessary. If there is any, make sure that it is totally insulated and it can not have any contact. Make sure that any metal part do not come in contact with another metal device with ground connection.